Du søkte etter: Microscopy and staining reagents

Produsent: Merck

Beskrivelse: Neo-Clear® is a non hazardous alternative to xylene. It is virtually odourless, compatible with most high purity solvents and is characterised by lower evaporation rates than xylene, making it a lower health risk.

HMS

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Immersion oil has been used in epifluorescent microscopy and cell identification.

Artikkenummer: (H2779-1L)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: HistoChoice® is a patented, complex mixture of agents that allow tissues to retain their structure, antigenic sites and nucleic acid sites. This formulation in non-citrus, contains no mercury, formaldehyde or glutaraldehyde.

UOM: 1 * 1 L

Sertifikater Tilbud

Artikkenummer: (EM0300-1KT)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Spurr resin is a hydrophobic resin. It is less viscous than epon mixtures and is easier to dispense. The low viscosity of the resin contributes to its penetration in tissue, mineral and dense structures. A low viscosity of 60 cps also allows easy penetration into a variety of difficult materials.

UOM: 1 * 1 Each

Tilbud

Artikkenummer: (1.00579.0500)

Produsent: Merck

Beskrivelse: DPX new is a synthetic non aqueous mounting medium for microscopy. In its formulation, the teratogenic plasticiizer dibutyl phthalate (DBP) has been avoided, which renders the composition safer for the environment and more user friendly than the conventionally used mounting agents such as DPX.

UOM: 1 * 500 mL

HMS Tilbud

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: This is a mounting medium (contains 45% acrylic resin and 55% xylenes) used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials.

Sertifikater

Artikkenummer: (A3429-4L)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Differentiation solution comprises acidified ethanol or isopropanol that is used to decolourise hematoxylin stain. The duration of exposure to the solution determines the degree of decolourisation. Differentiation is a crucial step in hematoxylin-eosin staining to achieve the proper colour contrast necessary for visualisation, by selectively removing excess hematoxylin from the tissue section and leaving behind the desired staining intensity.

UOM: 1 * 4 L

Tilbud

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Bouin's solution is an excellent fixative for preserving soft and delicate structures. It is prepared with saturated picric acid, formaldehyde and acetic acid.

Artikkenummer: (F4680-25ML)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Fluoromount™ Aqueous Mounting Medium for use with fluorescent dye-stained tissue.

UOM: 1 * 25 mL

Sertifikater Tilbud

Artikkenummer: (317616-100ML)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: D.P.X mounting medium is a mixture of distyrene (polystyrene), a plasticizer (tricresyl phosphate), and xylene. It facilitates the protection of stains and can dry quickly.

UOM: 1 * 100 mL

Tilbud

Artikkenummer: (F6057-20ML)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: Fluoroshield™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

UOM: 1 * 20 mL

Tilbud

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: DPX Mountant for histology has been used as a slide mountant to fix sections.

HMS

Produsent: Merck

Beskrivelse: Water-free mounting media, such as Neo-Mount®, should be used for permanent mounting and long-term storage of samples. Slides processed in pathologyl laboratories need to be stored up to 10 years, whereby the staining results need to be stable and fading-out is not acceptable. Neo-Mount®, anhydrous mounting medium for microscopy is an extremely colour-stable mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount® needs to be combined with Neo-Clear® exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior to mounting, any excess Neo-Clear® should be circumvented, as air bubbles might arise under the cover slip. The same pre-condition should also be met when mounting specimens using cover slip machines; in this area, Neo-Clear® can be most efficiently eliminated by incubating the slides for 1 minute in an empty slide rack.

HMS

Produsent: Merck

Beskrivelse: Entellan® new is a new mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 250 and 600 mPas, 1,00869 has a small viscosity range. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new.

HMS

Artikkenummer: (1.08562.0050)

Produsent: Merck

Beskrivelse: Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.

UOM: 1 * 50 mL

HMS Tilbud

Artikkenummer: (45359-1EA-F)

Produsent: SIGMA ALDRICH MICROSCOPY

Beskrivelse: The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).

UOM: 1 * 1 Each

Tilbud